Réseau d'assistance Kollmorgen

Search Articles

Motor Phase Wiring - S300 or S700 to KBM with Non-Standard ConnectionsApplication Note: Motor-Phasing/wiring: non-standard, S300 or S700 - positive feedback count with a CW rotation as viewed from the lead exit end, for KBM(s) motor. English
Motor Phase Wiring - AKD to KBM Preferred StandardApplication Note: Motor-Phasing/Wiring: Preferred Standard; AKD-drive to KBM(s) frameless motor – series. English
Motor Phase Wiring - AKD to KBM with Non-Standard ConnectionsApplication Note: Motor-Phasing/wiring: non-standard, AKD - positive feedback count with a CW rotation as viewed from the lead exit end, for KBM(s) motor English
EthernetIP Example with PCMM as Scanner and AKD as AdapterThis article is aimed to get some basic overview of EtherentIP communication with AKD. A variety of controllers are supporting ethernetIP. English
AKD-N Cable LengthsAKD-C offers two separate strings to connect up to 8 AKD-N to each of them. Maximum total cable length for each string is 100m. English
AKD-C Cable LengthsAKD-C offers two separate strings to connect up to 8 AKD-N to each of them. Maximum total cable length for each string is 100 m. English
KAS Modbus RTU Communications (through AKI terminal)The following procedure outlines setting up Modbus RTU communications between the AKI HMI and a third party device. English
S700 and S300 Motion Tasking ExampleThis article explains how to setup a Motion Task in the S300 and the S700 servo drive. English
AKD EtherNet/IP Diagnostics and Dynamic MappingApplication Note on AKD EtherNet/IP Diagnostics and Dynamic Mapping when used with Contrologix or Compactlogix PLCs. English