Accueil >
Base de connaissances >
FAQ >
Téléchargements >Assistance par produit
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
Search Articles
| Optimizing Machines Using Programmable Drives | English | |
| Feedback Sensors Keep Servomotors on TargetServomotor-powered motion control systems are expected to be fast and accurate, and when correctly specified, they are. However, there are numerous factors that cause them to miss the target. | English | |
| Problems connecting a CompactLogix PLC to an AKD drive?When connecting an AKD to a CompactLogix PLC (or any PLC that communicates via EtherNet/IP), please make certain you are using an AKD version which supports EtherNet/IP Fieldbus communications. | English | |
| What do I do if I encounter an F305 Fault (Brake Open Circuit) on my AKD servo drive?F305 and MOTOR.BRAKE | English | |
| I'm getting an F401 Error on the AKD Servo DriveThe F401 error results when parameters related to the anticipated feedback device are in error. | English | |
| Velocity mode control of an axis with KAS controllerThe attached demo project shows how to control a servo axis with a KAS controller in Velocity Mode instead fo the default Position Mode. | English | |
| Electric Cylinder Low Temp Grease OptionFor Kollmorgen (IDC) electric cylinders with a ballscrew and purchased with the "low temperature grease option", the special grease is Kollmorgen P/N 961266. This grease will be required for periodic maintenance of the actuator. Grease is a type Aeroshel 22. | English | |
| Creating a Motion Task S-Curve Profile Table in the AKDUse the Excel file titled “AKD S-CURVE GENERATOR TWO.xls” (see attachment) to generate a csv file with the profile data. | English | |
| Does KAS IDE work on Windows 10?KAS IDE supported by Windows 10. | English |