Réseau d'assistance Kollmorgen

Search Articles

AKD Homing to Marker on Secondary Feedback (X9) English
Calculating Actual Motor Torque and Current with PN Motion Engine ECAT  (Ethercat) Object 6077 is part of the standard ECAT PDO mappings to KAS from the AKD drive. From the PDO section tab of an AKD axis in an an IDE project. English
Motor Phase Wiring - S300 or S700 to KBM with Non-Standard ConnectionsApplication Note: Motor-Phasing/wiring: non-standard, S300 or S700 - positive feedback count with a CW rotation as viewed from the lead exit end, for KBM(s) motor. English
Motor Phase Wiring - S300 or S700 to KBM Preferred StandardThe preferred standard electrical connections between the S300/S700-drive to KBM(s) - frameless motor, unless specifically stated otherwise, are based upon a C.C.W. rotation of the rotor as viewed from the lead-exit end of the motor, for a positive count direction of the position-loop. Hence the… English
Motor Phase Wiring - AKD to KBM Preferred StandardApplication Note: Motor-Phasing/Wiring: Preferred Standard; AKD-drive to KBM(s) frameless motor – series. English
Motor Phase Wiring - AKD to KBM with Non-Standard ConnectionsApplication Note: Motor-Phasing/wiring: non-standard, AKD - positive feedback count with a CW rotation as viewed from the lead exit end, for KBM(s) motor English
EthernetIP Example with PCMM as Scanner and AKD as AdapterThis article is aimed to get some basic overview of EtherentIP communication with AKD. A variety of controllers are supporting ethernetIP. English
AKD-N Cable LengthsAKD-C offers two separate strings to connect up to 8 AKD-N to each of them. Maximum total cable length for each string is 100m. English
AKD-C Cable LengthsAKD-C offers two separate strings to connect up to 8 AKD-N to each of them. Maximum total cable length for each string is 100 m. English