Kollmorgen Support Network

Search Articles

Electro-Magnetic Interference Reduction Techniques EMI (Electro-Magnetic Interference) comes in different forms, frequencies, and levels. Electronic equipment has different categories for both emissions and susceptibility. Under normal circumstances elimination is not possible so reduction to acceptable levels is what can be reasonably achieved. English
Hints for Designing Better Servo Control SystemsITX:Servo control system engineers chiefly work in two well-defined areas. They design new motion control systems for conveyors, pick and place machines, gantries, machine tools, and much more. English
Dual UseThe term "dual use" identifies the basic usability of a technology (both a machines and software) as used for both peaceful and military purposes. English
WKS or DIGIFAS to SERVOSTARValid for S300, S400, S600, S700 English
Replacement of ACOMEL DrivesValid for S300, S700 Most of the ACOMEL drives used in high frequency applications can be replaced with S300/S700 servo amplifiers with special firmware. English
Tuning - High Frequency Spindles S300-S700Valid for S300, S700 English
KAS Simulator won't run because port 80 is usedKAS Simulator requires the use of port 80 but sometimes other applications are using it. The application will need to be stopped before Simulator can be used. There are several ways to determine what is using the port. English
Continous Motion Task on AKDIn some applications, it is necessary to execute a continuous velocity move for an undetermined length of time, and then stop at a specified angular motor position. This is done by using modulo and setting up a motion task to repeat itself indefinitely until it is set to no longer repeat. English
Using AKD Secondary Feedback in KAS pipe network application The program calculates the pulses from the secondary FB each scan and and adds to the parameter: A1_X9EncIn. English