Back to top
Title Language File Type: Size Release Date
pdf PMX Stepper Motors REACH Declaration
Declaration of conforming to REACH Regulations Art. 33(1) regarding Substances of Very High Concern [SVHC] as referenced by Candidate List last amended on 08 July, 2021.
Release: –
English pdf 280.28 KB 4/25/22
pdf Powermax REACH SVHC Certificate of Compliance
Powermax REACH SVHC certificate of compliance. Specifies substances of very high concern with regards to regulation (EC) No 1907/2006 of the European parliament and REACH Art. 33(1). For Powermax models whose model numbers start with either P or M, are followed by a 1 or 2, followed by another number, followed by letters “XXXX-XXX-XX”, and then ending in 00 or 01.
Release: –
English pdf 282.96 KB 4/25/22
pdf Powermax EU RoHS Declaration (RoHS10)
EU RoHS declaration for all standard AKD models in accordance with directive 2011/65/EU of the European parliament.
Release: –
English pdf 214.63 KB 4/25/22
pdf Cartridge DDR REACH SVHC Certificate of Compliance
Cartridge DDR REACH SVHC certificate of compliance. Specifies substances of very high concern with regards to regulation (EC) No 1907/2006 of the European parliament and REACH Art. 33(1). Products: Standard Cartridge DDR motor models (models starting with “C” or “CH” that contain less than 14 digits)
Release: –
English pdf 285.96 KB 4/22/22
zip AKD2G Servo Drive Firmware FS1 (AKD2G-S-A-02-09-00-001)
AKD2G Servo Drive Firmware for CANopen, EtherCAT, EtherNet/IP, PROFINET, and Analog devices. This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual-Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).
Release: 02.09.00.001
English zip 21.24 MB 4/4/22
pdf QMP EU ROHS Declaration (RoHS10)
EU RoHS declaration for all standard AK models in accordance with directive 2011/65/EU and EU 2015/863 of the European parliament.
Release: –
English pdf 217.28 KB 4/4/22
pdf QMP REACH SVHC Certificate of Compliance
QMP REACH SVHC certificate of compliance. Specifies substances of very high concern with regards to regulation (EC) No 1907/2006 of the European parliament and REACH Art. 33(1).
Release: –
English pdf 286.17 KB 4/4/22
null AKD2G Firmware Release Notes EN (REV 02.09.00.001)
These release notes for the AKD2G drive firmware (software that executes inside the AKD2G drive) describes the changes between the previous firmware releases and the current release. Includes known issues, new features, feature changes, and fixed bugs.
Release: 02.09.00.001
English null 4/1/22
zip AKD2G Servo Drive Firmware FS1 (AKD2G-S-A-02-09-00-000)
AKD2G Servo Drive Firmware for CANopen, EtherCAT, EtherNet/IP, PROFINET, and Analog devices. This firmware complies with recently revised U.S. and E.U. export regulations (E.U. Dual-Use Regulation 428/2009, and U.S. Dual-use regulation EAR Category 3 under ECCN3A225).
Release: 02.09.00.000
English zip 21.24 MB 4/1/22
pdf S200 EU RoHS Declaration
Declaration of conformity with Directive 2011/65/EU
Release: –
English pdf 415.36 KB 3/28/22
pdf S200 REACH SVHC Certificate of Compliance
S200 REACH SVHC certificate of compliance. Specifies substances of very high concern with regards to regulation (EC) No 1907/2006 of the European parliament and REACH Art. 33(1), and REACH Annex XVII Substance Restrictions.
Release: –
English pdf 482.21 KB 3/28/22
zip KAS Runtime Firmware for AKC-PCMM (KAS-PCMM-M-M1EC) rev3.07.0.87516
KAS Runtime Firmware for single-core PCMM. Note: PCMM Runtime version and KAS IDE version must be identical (e.g. both must have version 3.00.x.zzzz).
Release: 3.07
English zip 12.86 MB 3/4/22
zip KAS Runtime Firmware for AKD-PDMM (KAS-PDMM-M-MCEC) rev3.07.0.87516
KAS Runtime Firmware for 800 MHz AKD PDMM. Note: PDMM Runtime version and KAS IDE version must be identical (e.g. both must have version 3.00.x.zzzz).
Release: 3.07
English zip 12.86 MB 3/4/22
zip KAS Runtime Firmware for AKC-PCMM (KAS-PCMM-M-M2EC) rev3.07.0.87516
KAS Runtime Firmware for dual-core 1.2 GHz PCMM. Note: PCMM Runtime version and KAS IDE version must be identical (e.g. both must have version 3.00.x.zzzz).
Release: 3.07
English zip 12.92 MB 3/4/22
zip KAS Runtime Firmware for AKC-PCMM (KAS-PCMM-M-MCEC) rev3.07.0.87516
KAS Runtime Firmware for 800 MHz single-core PCMM. Note: PCMM Runtime version and KAS IDE version must be identical (e.g. both must have version 3.00.x.zzzz).
Release: 3.07
English zip 12.86 MB 3/4/22
zip KAS Runtime Firmware for AKD-PDMM (KAS-PDMM-M-M1EC) rev3.07.0.87516
KAS Runtime Firmware for 1.2 GHz AKD PDMM. Note: PDMM Runtime version and KAS IDE version must be identical (e.g. both must have version 3.00.x.zzzz).
Release: 3.07
English zip 12.86 MB 3/4/22
zip S200 SynqNet Drive Map Parameter File
This is an updated drive parameter map file for S200 drives with SynqNet. The ZIP file includes the Kollmorgen_S200.dm and a readme file with instructions. This supports all S200 versions, all MPI versions.
Release: 4.0G
English zip 4.16 KB 2/23/22
pdf S200 Position Node Installation Guide (Rev F)
This document covers specifications, accessories, installation, wiring diagrams, pinouts, power requirements, system startup, cables, and regulatory information.
Release: F
English pdf 3.16 MB 2/14/22
pdf ISO 9001:2015 Certificate US
TUV USA certification for Design, Manufacture, Aftermarket Servicing and Customer Support for Motion Control Products meeting ISO 9001:2015 requirements.
Release: –
English pdf 536.76 KB 2/11/22
zip S200 Tools Base and SynqNet GUI v2.9.905
Software for working with S200 drives. This version of S200 Tools is compatible with the latest S200 drive hardware models (LogicVer 4), and is backwards compatible with older S200 hardware (LogicVer 3, with firmware 3.2M, for example). See the S200 user documentation for details.
Release: 2.9.905
English zip 5.63 MB 2/11/22
pdf ODVA Declaration of Conformity for AKD2G-SPI (EtherNet/IP) Drives
Declaration of Conformity for the AKD2G-SPI (EtherNet/IP) drive's compliance with standards from ODVA.
Release: –
English pdf 124.67 KB 2/10/22
zip KVB 2.40 SP3 Sample Project for AKI2G Panel with AKD
Valid for KVB software 2.40 SP3 Build 2.43.17.0 for AKI and AKI2G. This HMI program is set up to run motion tasks in the AKD drive. The operator can select from 5 motion tasks saved in the drive and run the selected task. The distance and speed of one other task can be edited by the operator. This program is also set up to run a manual jog move in velocity mode. For more information, see the application note included in this package.
Release: 2.43
English zip 29.11 MB 2/3/22
zip KVB 2.40 SP3 Sample Project for AKI2G Panel with AKD BASIC
Valid for KVB software 2.40 SP3 Build 2.43.17.0 for AKI and AKI2G. An HMI program that is setup to work with a Basic program in the AKD Basic drive. Allows the operator to select and execute five pre-programmed position moves saved in the Basic program. The operator can edit the distance and speed of one pre-programmed position move. Indicators show the status of motion. The HMI will indicate if homing is complete and the homing move can be started from the HMI. See the application note and Basic program in this package.
Release: 2.43
English zip 29.28 MB 2/3/22
pdf S200 EU Konformitätserklärung ROHS
EU Declaration of Conformity for SERVOSTAR S200.
Release: 2022
German pdf 33.26 KB 2/3/22
pdf AKD Installation Manual EN (REV AF)
Installation manual for AKD, AKD BASIC, and AKD PDMM drives. Describes the AKD series of digital drives and includes mechanical, electrical, and software installation information needed to safely install AKD.
Release: 02/02/2022
English pdf 15.61 MB 2/2/22

Pages