Search Articles

What to do if the P7000 drive locks up and won't communicate.If the P7000 stepper drive "locks up" or will not communicate with the P7000Tools software, it is possible that the firmware has been lost or corrupted.  If this is the case, reloading the firmware will fix it. inglês
HWR Number S300valid for S300  inglês
HWR Number S400Valid for S400 inglês
HWR Number S600Valid for S600 inglês
HWR Number S700Valid for S700 inglês
Setting up the AKD to Close Position Loop on an External EncoderSetting up the AKD to Close Position Loop on an External Encoder   inglês
How to Set a KVB Tag to be Non-VolatileIn the tag, there is a checkbox used to make that tag non-volatile.  This will make the tag retain its value when the AKI panel is powered down.   inglês
Path Application TuningPower Point presentation describing the effects of servo gains when performing path motions. See attachment Path Application Tuning below. inglês
Low Temperature Rating for CF and CP Kollmorgen Cables (for AKD)The low temperature rating, for static (non-flexing) cable applications, is -25 degrees C.  Research was conducted specifically on cables CF-RA2574N-xx and CP-507CCAN-xx. inglês