Home >
Knowledge Base >
Community >
Downloads >Error Message F11
Valid for S300, S400, S600, S700
| Display | Meaning | Possible cause | Measure S300/S700 | Measure S400/S600 |
|---|---|---|---|---|
| F11 | Motor brake cable broken | Short circuit, short to ground | Replace the cable | Kabel ersetzen |
| Motor cable without brake wires | Connect the correct motor cable | Passende Motorleitung anschließen | ||
| Motor without a brake | Set MBRAKE to 0 | Set MBRAKE to 0 | ||
| Motor brake current consumption too low | Raise current consumption to a minimum of 150mA (e.g. through parallel resistors). | Raise current consumption to a minimum of 150mA (e.g. through parallel resistors). | ||
| Hardware faulty | Return the servo amplifier to manufacturer for repair | Return the servo amplifier to manufacturer for repair |
