Search Articles

KVB Release NotesRelease Notes İngilizce
DC Torquer Old CatalogOld DC Torquer Catalog for NT, QT, and T İngilizce
PCMM Dual-Core - New KAS Controller Model!The PCMM (Programmable Controller Multi-Axis Master) Dual-Core is a PCMM 1.2GHz with two CPU cores. It shares the same electronic hardware, connectors, and signals as the PCMM single core model. It has the same features, functionality, memory, and flash storage as the PCMM single core model. İngilizce
EOT (End of Travel) Software Position Limits in a KAS applicationIn a KAS PxMM application program, to setup software End Of Travel (EOT) position limits: İngilizce
HOME.MODE 0 vs. HOME.SETHOME.SET When HOME.SET when executed it will set the commanded and current position equal ( PL.CMD an PL.FB respectively )  to the HOME.P value. HOME.P can be set by the Workbench Terminal, on the home screen in the “Position” field ( see below ) or over fieldbus if desired. İngilizce
KAS v3.0 Software is Now Available!New Features AKD2G Drive Integration: Single and Multi-Axis drive variants Features not yet available: firmware download, capture, I/O, feedback #2-5 Note: Please contact Kollmorgen for latest AKD2G firmware and KAS software. İngilizce
Shared Drive in PDMM or PCMM Application Fails to MountThe PxMM can work with data from an external or shared drive. Mounting is the software process in the PxMM that enables it to read and write data to/from a shared drive. If the mounting process fails in the PxMM the following message will appear in the IDE Controller Message Log. İngilizce
Can an AKD EtherNet/IP drive operate using a different command source other than Service?We are often asked if an AKD-P-NBEI ( EtherNet/IP ) drive can use step/dir (electronic gearing ) or analog as the command source and simply use EtherNet/IP for İngilizce
What are the limitations of AKD EtherNet/IP?Important Limitations Of The AKD Ethernet/IP Drive İngilizce