Search Articles

Differences Between DISTANCE and POSITION Moves.This article refers to G&L PiC application note document AN000003 İngilizce
Using a Time AxisThis article refers to G&L PiC application note document AN000004 İngilizce
PiCPro Time and Date StampThis article refers to G&L PiC application note document AN000001 and describes how the PiC900 time/date stamp on an .LDO file works. İngilizce
Low Voltage AKD OperationLow voltage DC for AKD with 0069 option. İngilizce
Using AKD in a Vertical AxisUsing AKD in a Vertical Axis İngilizce
Eight (8) Pin AC Synchronous Motor ConnectionsSuperior Electric manufactured an 8 pin integral connector for the AC Synchronous SS Series motors. İngilizce
Using FB2 as position loop feedbackSee attached pdf instructions on setting up FB2 as position loop feedback.  The instructions give a step by step example using the Workbench scope for conformation at each step. İngilizce
S700 Series Servo Drive with a F23 Fault ConditionIf the CANopen communications is not being utilized, use this procedure to deactivate the F23 fault. İngilizce
AKD Drive Command Source Fieldbus versus Service İngilizce