E-Eğitim
İleriki günlerde yapılacak web seminerlerine ve istediğiniz hızda öğrenmek için genişleyen e-öğrenme kütüphanemize göz atın.
(Webinar presentations in English)
- All Training
- Upcoming Webinars
- On-demand Webinars
- Classroom Training
* All webinars are presented in English, unless otherwise noted.
*Classroom courses are taught in English and in-person at our office in Radford, Virginia, USA, unless otherwise noted.
Bessere Leistung durch moderne Trägheitsanpassung >
Webinar
Unerwartete Bewegungen können Produkte ruinieren und zu gefährlichen Situationen führen. Was wäre jedoch, wenn man diese Bewegungen beseitigen sowie gleichzeitig die Motorgröße verringern und die Leistung steigern könnte? Unmöglich? Nicht, wenn…Deutsch
* All webinars are presented in English, unless otherwise noted.
Motori frameless: less is more. Scopri come aumentare le prestazioni, semplificando la progettazione (session 2) >
Live Webinar
Italiano
Hareket 101 Çevrimiçi: Mentör Oturumları: Elektrik Hareketinin Temelleri >
Live Webinar
Hareket 101 Çevrimiçi: Mentör Oturumları: Motor Performansının Temelleri >
Live Webinar
AKD BASIC Mentör Oturumları: AKD BASIC Kurulumu >
Live Webinar
AKD BASIC Mentör Oturumları: AKD BASIC İleri Düzey Programlama Döngüleri >
Live Webinar
Birden Fazla Alandaki İşlemler İçin Hareket Kontrolünü Optimize Etmenize Yardımcı Oluyoruz: Kara, Hava, Deniz ve Uzay >
Live Webinar
*Classroom courses are taught in English and in-person at our office in Radford, Virginia, USA, unless otherwise noted.
AKD Advanced Tuning >
Classroom Training
Hands-on workshop focusing on tuning the AKD servo drive with complex mechanisms utilizing powerful analytic tools and advanced filters. $2200/Student
AKD/AKD BASIC - Hands-on workshop >
Classroom Training
Overview and set-up of AKD and AKD BASIC drives, including wiring, tuning, and programming in BASIC language. $1500/Student
AKD2G Setup >
Classroom Training
This class covers an overview and setup of the Kollmorgen AKD2G dual Axis drive and an overview of Safe Functions.
KAS/PCMM Programming >
Classroom Training
This class provides an overview of the KAS and PCMM controller products with hands-on application of the Integrated Development Environment (IDE), Runtime, and adaption to AKD drives. Also included is the introduction to the IEC61131 programming…
Motion 101- Servo/Step Product Introduction and Application Sizing >
Classroom Training
Introduction to basic motor technologies, motion control, servo loops and application sizing. $325/Student.
P8000 Stepper Drive Setup >
Classroom Training
This class provides an overview of the KAS and PCMM controller products with hands-on application of the Integrated Development Environment (IDE), Runtime, and adaption to AKD drives. Also included is the introduction to the IEC61131 programming…
