SAFETY – THE RISK WITH VERTICAL AXES
The risk with vertical axes
Monitoring and controlling brakes are part of functional safety technology at KOLLMORGEN
The traditional solution for safe brake control is problematic due to new safety standards, as the motor brake needs to be tested periodically in order to ensure that it is functioning properly. Additionally embedding the test function into the standard controls conflicts with the requirements under safety standard ISO 13849-1. What options are available? KOLLMORGEN’s solution is based on drive-based safety technology – specifically in the form of the “Safe Brake Control” function with integrated brake test.
The traditional solution for safe brake control turns out to be problematic on account of new safety standards, as the motor brake needs to be tested periodically in order to ensure that it is functioning properly. This is accompanied by the fact that embedding the test function into the standard controls conflicts with the requirements under safety standard ISO 13849-1. What options are available? KOLLMORGEN’s solution is based on drive-based safety technology – specifically in the form of the “Safe Brake Control” safety function with integrated brake test.
The new AKD2G generation of servo drives from KOLLMORGEN is an example of how to achieve additional benefits in machinery and system construction with increased safety. The product provides important safety functions on the controller side with Safe Brake Control (SBC) and Safe Brake Test (SBT). The innovative feature of implementing safety functions with the holding brake integrated into the drive motor applies especially to areas where redundant dual- channel safety brakes are too complicated or too expensive. These areas of application will become more frequent collaborative production becomes more popular. Customers are increasingly moving towards plant automation; whether for setup operations, assembly or maintenance. These types of operations that require people to work in close proximity to machines make safety a top priority.
Safe brake monitoringWhat inferences can be drawn from this for vertical loads? The general principle is that the holding brake installed in the drive motor must be designed in such a way that it is able to hold the load acting vertically on an axis. There are two requirements that follow from this in terms of implementation: adequate sizing for the holding brake with a torque surplus of 30 percent to the maximum load and secure identification of faults or errors that result in the braking torque ascertained not being achieved. In the second case the individual could no longer be guaranteed protection, as the risk increases that loads may slip through. With “Safe Brake Test”, KOLLMORGEN is launching an effective safety function for the servo drives in the S700 series and the AKD2G series so that any faults or errors can be safely identified.
The “Safe Brake Test” (SBT) safety function is responsible for carrying out regular tests on the spring-applied brakes installed in the servomotors of KOLLMORGEN’s AKM servo motors and AKM2G ranges. The required braking torque derived from the application is reviewed automatically by the safety technology in the drive controller at regular intervals, thereby ensuring safe functionality.
There can be multiple root causes for loss of the nominal braking torque of a spring-applied brake, such as glazed or worn friction pads, oil residues, as well as broken springs. The spring-applied brake can no longer achieve its full braking torque if springs break as a result of material fatigue. As it can be assumed that not all springs will break at the same time, the decrease in the braking torque will occur gradually – a process that can be monitored using SBT. These tests will be carried out at least once per shift depending on the risk assessment for an application.
Test routines from the drive
Since torques need to be applied for the SBT, integrating this Safety Test function into the drive controller is the only option, as the controllers have to produce this torque. Similar test functions carried out previously by system PLCs are problematic under current standards. ISO 13849 is particularly relevant here. This stipulates that the parameters for the brake test must be configured safely. However, an external Safety PLC is unable to apply torque, so integration of the SBT into the KOLLMORGEN servo drives is a suitable option with the aim of reaching performance levels in conjunction with the Safe Brake Control (SBC).
Slim design for safety technology
KOLLMORGEN is bringing additional safety functionality to the drive level during ongoing operation with Safe Brake Control. This can be conveniently configured via the KOLLMORGEN Workbench graphic user interface – without requiring any additional application software for the safety technology. Since safe motion guidance also logically requires secure communication, the new AKD2G range of devices uses the safety protocol for Ethercat FSoE. As a result the communication for the safety technology is incorporated into the machine’s existing real-time communication. This means that no additional wiring is required together with I/O modules in order to control the Safe Motion functions. The advantages include space savings of almost 15 percent in the control cabinet with costs for the safety technology reduced by up to 20 percent at the same time. Availability also increases as some components and cables are known to improve overall system reliability.
KOLLMORGEN supplements this slim approach to implementing drive-based safety solutions for vertical loads with safe power reduction for the motor brake. This is made possible by a magnetic coil used to raise a spring-applied brake. It is worth reducing the power accordingly since a higher level of power is required to raise the brake than that required for maintaining a raised state. Two benefits of this approach are that energy consumption is reduced during machine operation and the amount of heat dispersed inside the motor is reduced while motor output increases.
The bottom line
The original task for spring-applied brakes in servo motors involves holding loads or taking hold directly during an emergency stop. These components are not safety components by design and do not therefore have their own PL or PFH values. Ensuring that the drive controllers are able to control the spring-applied brakes safely and monitor these means that safety level SIL2/PLd can be achieved simply and cost-effectively; and with a second redundant brake it is possible to achieve a safety level up to SIL3/ PLe.
Author: Karl Pickan, product manager for safety technology
Since its founding in 1916, Kollmorgen’s innovative solutions have brought big ideas to life, kept the world safer, and improved peoples’ lives. Today, its world-class knowledge of motion systems and components, industry- leading quality, and deep expertise in linking and integrating standard and custom products continually delivers breakthrough solutions that are unmatched in performance, reliability, and ease-of-use. This gives machine builders around the world an irrefutable marketplace advantage and provides their customers with ultimate peace-of-mind. For further information please contact firstname.lastname@example.org or visit our website www.kollmorgen.com/uk