Kollmorgen is the leading global manufacturer of motor solutions for the robotics industry. We have decades of experience and an established track record in enabling robotic innovation for the most challenging applications – surgical, collaborative, industrial, and defense. Our robotic motors are mobilizing nearly 1 million robot joints and robotic arms today. With the widest range of standard and custom robotic motors, drives, controls, gearing and actuation, Kollmorgen will partner with you to find the optimal solution that differentiates your design.
- Service & Support
- Contact Us
Back to top
Question about Browse catalog on Stepper optimizer
I have 2 questions for Browse catalog on Stepper optimizer.
1) Regarding temperature curve, if a graph is over the limit, Can’t i use the product?
2) How many percentage of variation tolerance of pullout torque?
Thank you in advance,
Submitted by Hideharu Kurata Sun, 08/02/2020 - 22:07
Per Case 01759133:
Per your questions (below), if the blue performance line of the motor exceeds the orange temperature line on the graph, then the motor will overheat in continuous operation. If you need continuous operation, try selecting a solution (if available) that appears in green.
Pull-Out torque of a stepper motor is a function of both the drive and frequency. It’s more of a system-level question, which is why we don’t publish it. We do publish the holding torque, however. Depending on the model/series, the associate catalog should have a tolerance on the holding torque. For example, on the PMX line, the holding torque values are assuming +/-10%.
Submitted by jcoleman02 Fri, 08/07/2020 - 05:51