Back to top

Configuring the SC900 & SCE900 Servo Drives for AKM Motors

1. Click On-Line Tuning.

2. Under motors, click "Other..." at the bottom of the pull-down menu.

3. Enter current in Peak value, not RMS.

4. Enter number of motor poles, not pole-pairs.

5. Click OK and save the configuration

6. Set Commoff = 240.  This is set in the program after saving the configuration.

An AKM motor with resolver can be operated with an SC900 series amplifier providing that the motor is within the current limitations of the drive. Typically the motor resolver offset must be set to 240. This is in the configuration screen and called COMMOFF.