Back to top

Valid for S300, S400, S600, S700

Valid for  S300, S400, S600, S700

Valid for S300, S400, S600, S700

Display Meaning Possible causes  Measures S300/S700 Measures S400/S600

F05 

Valid for S300, S400, S600, S700

Display Meaning Possible causes  Measures S300/S700 Measures S400/S600

F03

Valid for S300, S400, S600, S700

Display Meaning Possible causes  Measures S300/S700 Measures S400/S600

F02 

Valid for S300, S400, S600, S700

Valid for S300, S400, S600, S700 

General

Jog mode is possible only in operation modes 4, 5, 6 or 8 and need no homing. Software limit switches are not effective because no reference point has been set. Therefore jog mode is possible immediately after the amplifiers has been switched on. Hardware limit switches are effective.

Valid for S400, S600

The analog input can be used for the setting of the position from firmware version 3.10. The function is similar to a master/slave effect.

Setting (ASCII commands)

ANCNFG 8
(Setup Software: I/O analog/ Setp. function: 8 Xcmd = AnIn1). Configures the analg input as a position setting input. 

Valid for S300, S400, S600, S700

Valid for S300, S400, S600, S700

Create table with Excel, normalize current / position values

 \

Save as DOS *.CSV file and edit (commata)

Split several tables with ";". Maximum 16 tables are allowed, maximum 8,000 points are allowed.

 

Convert table in the DOS screen with calclk_52b.exe

Download this tool from page Tools.

Pages