Valid for S300, S400, S600, S700
General
Jog mode is possible only in operation modes 4, 5, 6 or 8 and need no homing. Software limit switches are not effective because no reference point has been set. Therefore jog mode is possible immediately…
Valid for S300, S700
Application which require an automatic software reset:
The servo amplifier monitors error F05/F16, if simultaneously the hardware enable signal and the power supply is switched on, because the hardware enable is recognized…
Valid for S300, S400, S600, S700
Create table with Excel, normalize current / position values
Save as DOS *.CSV file and edit (commata)
Split several tables with ";". Maximum 16 tables are allowed, maximum 8,000 points are allowed.
Convert…