Kollmorgen Support Network

To better serve our Kollmorgen users with questions too complex to be addressed in this space, we made the painful decision to close this Community forum.

Please submit your question using the contact us form to reach our application engineering team.

For the immediate future, you can still access and read past posts.

Thank you for understanding and for participating in the community over the years.

S700 Motion Card (MC300) ??? | 28 Oct 2016 | |

S700 Motion Card (MC300) ???



I am working on a system built in Italy that has a Kollmorgen S700 drive and in Slot 1 there is a motion card referred to simply as MC300. Tech support has no record of this part number, does anyone know about this motion control card, it has a 25DB connector for discrete signals and a DB15 that is connected to a profibus network.

Comments & Answers

kenny.hampton@… said ...

kenny.hampton@… | Wed, 11/02/2016 - 13:06

There were multiple third party cards made for the S300/600/ 700 over the years. I suggest taking the card out and seeing if there is any labeling that may help determine what it is. Trio Motion has a part number system MCxxx and they did make a plugin for the S300 years ago. 
 

kenny.hampton@… said ...

kenny.hampton@… | Thu, 11/03/2016 - 16:25

 

It’s a motion card that programs in basic, attached you can find the instruction manual (it’s for the MC600 but the MC300 has the same functionality)
There’re 2 version of this card:
- MC-300-001 without profibus
- MC-300-002 with profibus

 

Mc600-v.2.10.pdf (355.89 KB)

kenny.hampton@… | Wed, 11/02/2016 - 13:02

There were multiple third party cards made for the S300/600/ 700 over the years. I suggest taking the card out and seeing if there is any labeling that may help determine what it is. Trio Motion has a part number system MCxxx and they did make a plugin for the S300 years ago.

About this Question

Judge
Taxonomy: