Skip to main content

Kollmorgen Support Network

To better serve our Kollmorgen users with questions too complex to be addressed in this space, we made the painful decision to close this Community forum.

Please submit your question using the contact us form to reach our application engineering team.

For the immediate future, you can still access and read past posts.

Thank you for understanding and for participating in the community over the years.

S7-1214C and Two Servos AKD-P00307-NBPN-E074 Don't Communication via Profinet | 25 May 2017 | |

S7-1214C and Two Servos AKD-P00307-NBPN-E074 Don't Communication via Profinet

Hi guys,
right now I am working at a app, where are PLC S7-1214C and two servos AKD-P00307-NBPN-E074. There is communication by profinet. Unfortunately PLC is not able connect to AKD servos via profinet. PLC doesn't see both AKD servos. I had checked a lot of manuals about AKD and examples of TIA project, but still no solution.
Anyone have any idea about it?

Thanks so much for Your support.

Comments & Answers

Martin Rupf | Mon, 05/29/2017 - 06:19

Hi Jiri,
To better understand where exactly you are stocked can you provide some more detailed information.
Following this example: https://kdn.kollmorgen.com/content/automation-akd-drive-siemens-s7-1200…
Are you able to see the drive from TIA?
Are you able to assign a name to the AKD via the TIA?
What is the Profinet status in the AKD? (PN.DIAG in workbench terminal)
Regards, Martin

About this Question

Jiri
Taxonomy: