Back to top

New Firmware v6.05 for S700 and S300

We have enhanced our new firmware 6.05 for S700 and S300 to now support the latest AKM2G servo motor family via plug and play. The motor database in the servo amplifier and in the DriveGUI now support AKM2G.

For space reasons, however, we had to remove some older motor series from the motor database which are no longer available. Specifically, this applies to following motor series:

  • 2SM
  • SBL
  • SBK
  • ILH

The following motors have been removed from the motor database starting with version 1.46:

2SM17M6000
SBL50660560
SBL30130560
SBL30250320
SBL30130320
SBL30065320
SBL51050560
SBL40750320
SBL40530320
SBL20020560
SBL20060320
SBL20040320
SBL40750560
SBL200804532
SBL20040560
SBL20060560
SBL30065560
SBL30250560
SBL40260560
SBL40530560
SBL61900320
SBL61900560
SBL62200560
SBL72600560
SBL73200320
SBL73200560
SBL61350560
SBL51350560
SBL40260320
SBL51350320
SBL50660320
SBL62200320
SBL20020320
SBK40100560
SBK40100560
SBK50430320
SBK60700560
SBK71200320
SBK70650320
SBK70650560
SBK50210560
SBK71200560
SBK71950560
SBK60700320
SBK50210320
SBK50210320
SBK60350320
SBK50430560
SBK40100320
ILH03-050A1 (230V)
ILH03-100A1 (230V)
ILH06-050B4 (230V)
ILH06-100A4 (230V)
ILH09-050B4 (230V)
ILH09-100A4 (230V)
ILH12-050B4 (230V)
ILH12-100A4 (230V)
ILH18-050B4 (230V)
ILH18-100B4 (230V)
ILH-03-050A  (230V)
ILH-03-050B (230V)
ILH-03-050C (230V)
ILH-03-050D (230V)
ILH-03-050E (230V)
ILH-03-100A (230V)
ILH-03-100B (230V)
ILH-03-100C (230V)
ILH-03-100D (230V)
ILH-03-100E (230V)
ILH-06-050A (230V)
ILH-06-050B (230V)
ILH-06-100A (230V)
ILH-06-100B (230V)
ILH-09-050A (230V)
ILH-09-050B (230V)
ILH-09-050C (230V)
ILH-09-050D (230V)
ILH-09-100A (230V)
ILH-09-100B (230V)
ILH-09-100C (230V)
ILH-09-100D (230V)
ILH-12-050A (230V)
ILH-12-050B (230V)
ILH-12-100A (230V)
ILH-12-100B (230V)
ILH-15-050A (230V)
ILH-15-050B (230V)
ILH-15-100A (230V)
ILH-15-100B (230V)
ILH-18-050A (230V)
ILH-18-050B (230V)
ILH-18-100A (230V)
ILH-18-100B (230V)

If you want to operate one of these motors with an S300 or S700 equipped with the latest firmware, this is still possible. The following alternatives are available for parameterizing the controller:

  • Copy an existing parameter set into the drive.
  • Load an older motor database <1.46 into the DriveGUI and parameterize the drive via the DriveGUI
  • Load an older motor database <1.46 into the drive using the Upgrade Tools and use the plug-and-play functionality

Older versions of the motor database can be found here.

If you have any questions, please contact your local Kollmorgen service partner.