Back to top

Kollmorgen servo motor cables merge problem

1 vote
+ vote
Vote up!

Hi Dear,

We are developing a project which we use six Kollmorgen servo motors. In this project we want servo motor cables merge with connectors the get out two cable (Power cable and Encoder cable). Could you recommend us a connector that we can connect the motor cables? To find the solution we need the core and diameter of the following cables. Could you give us the core diameters and numbers of the following cables? or We demand you to offer a solution for this problem. Thanks in advance for your help.

 Best Regards

Comments

Are you currently working with a Kollmorgen Distributor/Supplier? Cabling and project planning solutions should be coordinated with your local distributor and beyond the scope of the KDN community. If you need to local one you can find them at the Where To Buy link on our website: https://www.kollmorgen.com/en-us/where-to-buy/
Select Country: Japan and press the submit button in the bottom left of the web page.

I will investigate the cable dimensions but as far as connectorization and cable management you need to contact the distributor.

toddevans01 - Wed, 11/06/2019 - 09:46
Log in or register to post comments

1 Answer

0 votes
+ vote
Vote up!

Are you currently working with a Kollmorgen Distributor/Supplier? Cabling and project planning solutions should be coordinated with your local distributor and beyond the scope of the KDN community. If you need to local one you can find them at the Where To Buy link on our website: https://www.kollmorgen.com/en-us/where-to-buy/
Select Country: Japan and press the submit button in the bottom left of the web page.

I will investigate the cable dimensions but as far as connectorization and cable management you need to contact the distributor.

Comments

Cable specs for the AKM2G can be found in the cable guide at: https://www.kollmorgen.com/en-us/products/accessories/cables/literature/...

Other cable types in your list the specs can be found at : https://www.kollmorgen.com/en-us/developer-network/cables/

toddevans01 - Wed, 11/06/2019 - 11:52

Thank you for your help.

persler - Wed, 11/06/2019 - 21:57
Log in or register to post comments
ANSWER THIS QUESTION
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.

If you do not have an account, click here to register.