Skip to main content

Kollmorgen Support Network

To better serve our Kollmorgen users with questions too complex to be addressed in this space, we made the painful decision to close this Community forum.

Please submit your question using the contact us form to reach our application engineering team.

For the immediate future, you can still access and read past posts.

Thank you for understanding and for participating in the community over the years.

Digital Outs on X7 Do Not Respond | 21 Jun 2017 | |

Digital Outs on X7 Do Not Respond

I am currently setting up a system with an AKD-P. I would like to use the digital outs on X7 but unfortunately I can not measure any output at the pins. The GUI indicator LED in workbench next to the dropdown menu indicate that the condition is fulfilled. Now I wonder if  i forgot something or if the AKD is faulty.

Best Konstantin 

Comments & Answers

kenny.hampton@… said ...

kenny.hampton@… |

This connection drawing from the AKD manual explains how to wire the digital output on X7 and X8 correctly.  If you still have questions contact the Kollmorgen technical support directly at this phone no. 540-633-3545.


BAJ | Fri, 06/23/2017 - 19:44

Compare your wiring to that in the manual. As I recall you need to land the DC common (at least).

About this Question

Konstantin Willer