Community

To better serve our Kollmorgen users with questions too complex to be addressed in this space, we made the painful decision to close this Community forum.

Please submit your question using the contact us form to reach our application engineering team.

For the immediate future, you can still access and read past posts.

Thank you for understanding and for participating in the community over the years.

Product

Question contains

Subject	Author	Replies	Last Activity
Looking for specifications for AKM -Ex commutating encoders when paired with AKD Servo Drive >	josh.bellefeuille	0
Number of DRV.NVSAVE command in AKD >	defty	0
Path Motion Servo Tuning >	bill west	0
Double Dash >	Joe Rizzolo	0
AKD minimum wiring >	Tom Kunkel	0
Feedback Options Summary >	Tom Kunkel	0
direct drive frameless motors >	Tom Kunkel	0
Sizing tools and gearbox selection >	Tom Kunkel	0
Wiring diagram - 6 AKD drives sharing 1 External regen resistor >	Gary Matteson	0
What is the max data size that can be passed through Ethernet/IP into and out of a PDMM when using Polled I/O communications? >	C Wontrop	0
What is difference between BISS and Hyperface encoder? >	JohnKeesee	0
What are the high frequency harmonics in the feedback of our AKD system? >	Mark.Duckwitz	0
What should I do when I encounter an STO Fault (F602) on my AKD servo drive? >	Mark.Duckwitz	0
How do I solve a noise problem on a SERCOS amplifier? >	Mark.Duckwitz	0
Can the (AKD-xzzz07) drives operate on 230 Volt AC input? >	kdn-adm	0
Why can't I see my AKD drive when I try to connect in WorkBench? >	Jordan.Smith	0
What FW features are not supported in old AKD HW? >	ross.mcmillan	0
How do I set up an AKD? >	bill west	0
AKD Home mode 8 generate "439 Following error magnitude fault" >	Jean-Yves Garneau	0
Servostar S600 Firmware 7.77 >	S4GIA	0