Back to top

CCSAVE Parameter (S300, S700)

ASCII - Command CCSAVE    
Syntax Transmit CCSAVE [Data]    
Syntax Receive CCSAVE <Data>   Available in  
Type Variable rw   MMI No
ASCII Format Integer32   CANBus Object Number -
DIM -   PROFIBUS PNU no
Range 0 , 1   DPR No
Default -    
Opmode All   Data Type Bus/DPR Integer32
Drive State -   Weighting  
Start Firmware 2.15    
Configuration No   Last Change of this Object 1.6
Function Group drive configuration   EEPROM No
Short Description Save / reset CANopen communication parameter

Description

CCSAVE is used to save the CANopen communiaction parameter in object area 1000h – 1FFFh into the drive or to reset the values to default.

Two acceptable values are:
0 – CANopen-communication parameter are set to default. The new data are active after drive restart.
1 – CANopen-communication parameter are saved into the drive.